96 Disc Brake Rotor Specs [1 Attachment]

[Tom Nelson [e-mail] [vSAAB]]

I can't seem to find the rotor thickness in my V4 manual ...... anyone have the new thickness as well as the minimum machined thickness?

Tom, aka ElkMtnMan

[MH [e-mail] [vSAAB]]

... the minimum machined thickness?

Minimum disc thickness = 9 mm.
--
MH


------------------------------------
Posted by: MH <m.hilvers-epUZmem76+***@public.gmane.org>
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/vSAAB/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/vSAAB/join
(Yahoo! ID required)

<*> To change settings via email:
vSAAB-digest-***@public.gmane.org
vSAAB-fullfeatured-***@public.gmane.org

<*> To unsubscribe from this group, send an email to:
vSAAB-unsubscribe-***@public.gmane.org

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/

[Tom Nelson [e-mail] [vSAAB]]

Thanks Martin...... I have one disc at 9.00 mm and two at 9.70 mm, so I get the latter discs turned it appears.
Assuming the local NAPA shop uses the same spec minimum.

Tom, aka ElkMtnMan

Post by MH m.hilvers-epUZmem76+***@public.gmane.org [vSAAB]

... the minimum machined thickness?

Minimum disc thickness = 9 mm.
--
MH